Items for Sale
Coming soon for sale;
AK-105 SBR 12.5", with lots of Russian parts.
AK-102 SBR 12.5", conversion of Saiga .223 Russian.
Bulgarian AKS-74U, Short Barrel Semi-Auto Rifle
This extraordinary SBR was created for the advanced collector who values the extreme attention to detail, quality, and historical accuracy in this rifle. It has been created using an original Bulgarian SLR-105 receiver and Bulgarian AKS-74U part set. This rifle, when set next to my Arsenal Bulgaria Post-Dealer Sample Machine gun, can only be differentiated by looking through the magwell to see that there is no auto sear or pivot pin. The pin heads have been machined off an actual pivot pin, and attached to the receiver with gunsmith grade silver solder. No holes were drilled in the receiver. It is 100 % legal, and functions in semi-auto only.
Approximately twelve “Signature Series” rifles or less, are produced each year.
This is probably the only rifle I will ever offer for sale in this exact configuration.
Don’t miss out on the opportunity to acquire this extraordinary rifle!

Don’t miss out on the opportunity to acquire this extraordinary rifle!
All NFA/ATF&E rules apply. Texas residents must pay sales tax on this rifle.
Ted Marshall

Bulgarian AKS-74U kit
SLR-105 rifle donor receiver, new
Basic folder build
Tier II fit and finish ( Required for “Signature Series” )
“Signature Series” (12 or less built each year)
Marks on side to bottom of receiver, & engrave
Engraved selector marks & machine selector notch
Engrave, “force match” serial numbers on gas tube, top cover, and bolt carrier.
Faux 3rd pin heads w/ Y & U
Bulgarian rivet set
Marshall Arms Pistol grip reinforcement plate & installation
Sight bridge pivot pin & mag catch pin, new



|
Russian AK-105 Clone - Sold
"This is a rare opportunity,
as I typically build less than 6 rifles a year for
sale....don't miss out on this one ! "
This Russian clone
AK-105 is an extraordinary rifle, loaded with original
Russian parts.

Built on a NDS 2 receiver
which has had the center support & rivet replaced with the correct ones.
All the Historically Correct Details & Quality
you would expect from a Marshall Arms built AK.
|


|
This is a rare opportunity, as
I typically build less than 6 rifles a year for sale....
Don't
miss out on this one !

This
is a "SBR" with 12.5" barrel and must
be transfered to your Class III Dealer in your state.
All NFA rules & regulations apply!
UPDATE; Pics are not the best...but
you can see some of the details, like;
- The balled /
rounded rivets on the inside of the receiver.
- All
pins and detents are parked-NOT painted.
- The mag
catch (has rectangular dimple
not Bulge oval dimple) is installed after the rifle is painted.
- Rifle has
early style AK-105 double dimple trigger guard /
selector stop plate.
- Receiver has double trigger
bumps.
- Selector lever has 12-4 clocking reform, unlike
std 74' 12-6 clocking.
- Gas tube locking lever is
100 series "stamped" type.
- Top cover is smooth type with reforms on the bottom
edges.
- Complete stock / grip / handguard set is the Russian "real
deal"
with
military ink stamps.
- Correct 500 meter leaf sight
assy.
- Faux " bump
start" 4th rivet on LH side of receiver in bbl
trunnion rivet area.
- Loads of proof marks
- Correct
cyrillic selector markings
- Machined stop
notches.
- And of course lotts of "oil rag" fuzzies
for authenticity !
Don't miss out on this beauty!!!
For serious inquires
I will send a detailed "Price/Build sheet. Thanks,
TM
|

Marshall
Arms Repli-ppressor will make your AKSU legal length to avoid
SBR situation. Can be used with a 14X1 LH adapter
for use on AKM (it's original intended host). Works with all common AK calibers,
5.56 NATO, 5.45X39, and 7.62X39.
This is not an NFA device, but a replica of the Soviet PBS-1 (actually more akin
to the PBS-3 as used with the AKSU).
$200 plus shipping, Limited Quantities
Only 2 available, and they
are now out of production

Pistol
Grip Re-enforcement Plates
Marshall Arms has been producing and supplying pistol grip re-enforcement plates
for our customer builds for several years. We are pleased to announce that these
plates are now available to retail customers. They are accurate reproductions
of the original Russian round tab plates used on late style side folders and
the early square tab plates used on AKMS underfolders. They have been imitated,
but ours remain the highest quality available.
Applications:
Round tab p-grip plates $14 each:
Russian: AKS-74, AK-74M, All 100 Series, Bulgarian: AKS-74, AKS-74U

Izhmash
AK-100 Series Stock Sets - Sold Out
included
all rear trunion hardware, upper and lower
handgaurds (with correct heat shield), pistol grip and latest style Izhmash buttstock.
Same exact stocks as used on all AK-100 series/AK-74M new production guns from
Izhmash.
We
will not be getting any more of these
|